Die thermoelektrischen Bausteine und die Systeme — die Entwicklung, die Produktion, die Einführung

Tel./fax: +7 4842 901 954

Produkte

Thermoelektrische Kühler der M - SERIE

“ST“ Stellt das Angebot der kleinen stufigen thermoelektrischen Kühler (TEK) der “M-Serie“ vor. Die Mikrokühler der „M-Serie“ gewährleisten eine maximale Temperaturdifferenz zwischen der heißen und kalten Seite bis zu 130 K. Das Angebot ist in folgende Unterserien geteilt:

MS – standardmäßige thermoelektrische Kühler der „Pyramidenform“;

МЕ – stufige thermoelektrische Kühler mit der vergrößerten Kontaktfläche der gekühlten Unterlage. Die Mikro-Kühler dieses Unterserie lassen hinsichtlich der Wärmedaten (Qmax, DTmax) den  standardmäßigen thermoelektrischen Kühlern der „Pyramidenform“ nicht nach. Dabei ist die Fläche der Oberfläche der kalten Unterlage des thermoelektrischen Kühlers bis zu den Größen ihres Grunds vergrößert. Die vergrößerte Fläche der Kontaktfläche der oberen Stufe in der Verbindung mit der erhöhten mechanischen Haltbarkeit lässt zu, die Vorteile der Stufen-Kühlung bei der Arbeit mit den Objekten der höheren Größen zu verwenden;

ML – stufige thermoelektrische Kühler der linearen Form. Die Variante der thermoelektrischen Kühler "ME-Unterserie", werden für die tiefe Abkühlung der Objekte der Läng-Form (Ladungsverbindung-Matrizen,  Massive der Fotodetektoren usw.) verwendet.

Um ausführliche technische Informationen zu bekommen, wählen Sie den entsprechenden Abschnitt aus.

To get more technical information about concrete TEC model please choose corresponding section below.

Notes and Definitions section should be visited before start surfing catalogue of our products.

Notes and Definitions

Parameter

Definition

Imax, (A)

TEC current at ΔTmax

Umax, (V)

TEC voltage at ΔTmax

ΔTmax, (K)

Maximum temperature difference between TEC cold and hot side (I=Imax, Qmax=0)

Qmax, (W)

Maximum TEC cooling capacity  (I=Imax, ΔT=0)

Th, (K)

TEC hot side temperature

H, (mm)        

TEC height

Top=AxB, (mm)

Dimensions of the TEC cold side

Bottom=CxD, (mm)

Dimensions of the TEC hot side

General Notes:

All TEC performance characteristics given for 30°C in vacuum

All TEC dimensions given in millimeters

To estimate TEC cooling capacity (Q ) at ΔT different from ΔTmax use equation Q=Qmax (1-ΔT/ΔTmax)

To estimate TEC temperature difference (ΔT) at Q different from Qmax use equation ΔT = ΔTmax (1- Q/Qmax)

All our standard and customized TECs can be implemented in a according to standard Manufacturing Options.

Manufacturing Options

1. TEC substrates

a)      High Purity Aluminum Oxide (Al2O3, 99.6 %)

b)      Aluminum Oxide (Al2O3, 96 %)

c)      Aluminum Nitride


2. TEC internal solder

a)      PbSn (m/p: 183 °C)

b)      SnBi (m/p: 230 °C, Pb-free)

c)      AuSn (m/p: 280 °C, Pb-free) on request


3. TEC outer surfaces treatment

a)      Naked ceramic (no metallization)

b)      Au plated (ready for wire bonding process)

c)      Metallized and pretinned with:

-          InSn (m/p: 117°C);

-          BiSn (m/p: 138°C);

-          In (m/p: 157°C);

d)      Other options can be implemented on request


4. TEC current leads

a)      Pretinned copper wires (length can be varied on request)

b)      Insulated wires (length can be varied on request)

c)      Cu posts Au plated

5. Thermistor

Can be installed to the TEC cold/hot side on request

MS - Subseries

«MS – Subseries TECs» – cascade thermoelectric coolers with convenient pyramidal design.

MS - Subseries
Product Image TEC model DT max
(K)
Qmax
(W)
Imax
(A)
Umax
(V)
H
(mm)
Top,
AxB
(mm)
Bottom,
CxD
(mm)
  MS-2-AA-240 95
0.65
1.17
1.8
2.7
3.2x3.2
4.8x4.8
MS-2-AB-240 97
0.41
0.76
3.3
MS-2-AC-240 97
0.34
0.62
3.7
MS-2-AD-240 97
0.28
0.52
4.1
MS-2-AE-240 97
0.23
0.42
4.7
MS-2-AA-870 98
1.11
1.2
3.5
2.7
4.8x4.8
6.4x6.4
MS-2-AB-870 100
0.74
0.8
3.3
MS-2-AC-870 100
0.6
0.65
3.7
MS-2-AD-870 100
0.51
0.54
4.1
MS-2-AE-870 100
0.41
0.44
4.7
  MS-2-AA-280 95
1.23
1.12
3.5
2.7
4.8x4.8
6.4x6.4
MS-2-AB-280 97
0.81
0.73
3.3
MS-2-AC-280 97
0.65
0.6
3.7
MS-2-AD-280 97
0.54
0.51
4.1
MS-2-AE-280 97
0.42
0.42
4.7
  MS-2-AA-811 101
1.48
1.25
5.5
2.7
4.8x4.8
8x8
MS-2-AB-811 103
0.98
0.84
3.3
MS-2-AC-811 103 0.8
0.68
3.7
MS-2-AD-811 103 0.67
0.57
4.1
MS-2-AE-811 103 0.54
0.46
4.7
  MS-2-AA-031 96
1.96
1.14
5.6
2.7
4.8x4.8
8x8
MS-2-AB-031 98
1.31
0.77
3.3
MS-2-AC-031 98
1.01
0.61
3.7
MS-2-AD-031 98
0.89
0.53
4.1
MS-2-AE-031 98
0.71
0.41
4.7
  MS-2-AA-261 95
2.57
1.16
6.9
2.7
6.4x6.4
8x9.6
MS-2-AB-261 97
1.7
0.74
3.3
MS-2-AC-261 97
1.38
0.6
3.7
MS-2-AD-261 97
1.19
0.53
4.1
MS-2-AE-261 97
0.95
0.41
4.7
  MS-2-AA-681 98
2.68
1.22
8.1
2.7
6.4x6.4
9.6x9.6
MS-2-AB-681 100
1.74
0.81
3.3
MS-2-AC-681 100
1.42
0.65
3.7
MS-2-AD-681 100
1.21
0.54
4.1
MS-2-AE-681 100
0.98
0.43
4.7
  MS-2-AA-202 93
3.08
1.11
8.2
2.7
6.4x6.4
9.6x9.6
MS-2-AB-202 95
2.02
0.75
3.3
MS-2-AC-202 95
1.68
0.6
3.7
MS-2-AD-202 95
1.43
0.48
4.1
MS-2-AE-202 95
1.12
0.39
4.7
  MS-3-AA-001
108
0.62
0.94
3.4
3.8
3.2x3.2
6.4x6.4
MS-3-AB-001 110
0.41
0.62
4.7
MS-3-AC-001 110
0.36
0.49
5.3
MS-3-AD-001 110
0.29
0.44
5.9
MS-3-AE-001 110
0.21
0.36
6.8
  MS-3-AA-041 114
0.73
1.04
5.3
3.8
3.2x3.2
8x8
MS-3-AB-041 116
0.48
0.68
4.7
MS-3-AC-041 116
0.37
0.57
5.3
MS-3-AD-041 116
0.33
0.45
5.9
MS-3-AE-041 116
0.27
0.37
6.8
  MS-3-AA-671 113
0.95
1.03
6.5
3.8
3.2x4.8
8x9.6
MS-3-AB-671 115
0.64
0.67
4.7
MS-3-AC-671 115
0.5
0.55
5.3
MS-3-AD-671 115
0.41
0.46
5.9
MS-3-AE-671 115
0.34
0.37
6.8
  MS-3-AA-081 110
1.08
0.97
6.4
3.8
4.8x4.8
8x9.6
MS-3-AB-081 113
0.69
0.62
4.7
MS-3-AC-081 113
0.57
0.52
5.3
MS-3-AD-081 113
0.49
0.44
5.9
MS-3-AE-081 113
0.39
0.36
6.8
  MS-3-AA-422 110
1.36
0.98
8
3.8
3.2x4.8
9.6x9.6
MS-3-AB-422 113
0.9
0.63
4.7
MS-3-AC-422 113
0.72
0.51
5.3
MS-3-AD-422 113
0.61
0.45
5.9
MS-3-AE-422 113
0.49
0.32
6.8
MS-2-BA-810 100
0.54
2.8
0.82
2.7
2.5x2.5
4x4
MS-2-BB-810 101
0.35
1.8
3.3
MS-2-BC-810 101
0.29
1.5
3.7
MS-2-BD-810 101
0.24
1.3
4.1
MS-2-BE-810 101
0.2
1.0
4.7
  MS-2-BA-240 96
1.4
2.6
1.8
2.7
4x4
6x6
MS-2-BB-240 97
0.9
1.7
3.3
MS-2-BC-240 97
0.74
1.4
3.7
MS-2-BD-240 97
0.66
1.2
4.1
MS-2-BE-240 97
0.51
0.9
4.7
  MS-2-BA-870 98
2.51
2.6
3.5
2.7
6x6
8x8
MS-2-BB-870 99
1.66
1.8
3.3
MS-2-BC-870 99
1.35
1.4
3.7
MS-2-BD-870 99
1.13
1.2
4.1
MS-2-BE-870 99
0.92
0.9
4.7
  MS-2-BA-811 101
3.34
2.8
5.5
2.7
4x6
10x10
MS-2-BB-811 104
2.2
1.9
3.3
MS-2-BC-811 104
1.82
1.5
3.7
MS-2-BD-811 104
1.5
1.3
4.1
MS-2-BE-811 104
1.21
1
4.7
  MS-2-BA-261 94
5.5
2.6
6.8
2.7
8x8
10x12
MS-2-BB-261 96
3.63
1.7
3.3
MS-2-BC-261 96
2.95
1.3
3.7
MS-2-BD-261 96
2.5
1.1
4.1
MS-2-BE-261 96
2
0.9
4.7
  MS-2-BA-202 93
6.91
2.5
8.2
2.7
8x8
12x12
MS-2-BB-202 95
4.6
1.6
3.3
MS-2-BC-202 95
3.71
1.3
3.7
MS-2-BD-202 95
3.1
1.1
4.1
MS-2-BE-202 95
2.59
0.9
4.7
MS-3-BA-840 113
0.56
2.3
1.8
3.8
2.5x2.5
6x6
MS-3-BB-840 115
0.37
1.5
4.7
MS-3-BC-840 115
0.3
1.2
5.3
MS-3-BD-840 115
0.25
1
5.9
MS-3-BE-840 115
0.2
0.8
6.8
  MS-3-BA-001 107
1.42
2.1
3.4
3.8
4x4
8x8
MS-3-BB-001 109
0.94
1.4
4.7
MS-3-BC-001 109
0.8
1.1
5.3
MS-3-BD-001 109
0.65
1
5.9
MS-3-BE-001 109
0.53
0.8
6.8
  MS-3-BA-041 114
1.64
2.3
5.3
3.8
4x4
10x10
MS-3-BB-041 115
1.08
1.5
4.7
MS-3-BC-041 115
0.88
1.2
5.3
MS-3-BD-041 115
0.74
1
5.9
MS-3-BE-041 115
0.6
0.9
6.8
  MS-3-BA-081 110
2.41
2.2
6.4
3.8
6x6
10x12
MS-3-BB-081 111
1.61
1.4
4.7
MS-3-BC-081 111
1.31
1.2
5.3
MS-3-BD-081 111
1.11
1
5.9
MS-3-BE-081 111
0.89
0.8
6.8
 MS-3-BA-422 110
3.1
2.2
7.9
3.8
6x6
12x12
MS-3-BB-422 111
2.05
1.5
4.7
MS-3-BC-422 111
1.62
1.2
5.3
MS-3-BD-422 111
1.37
1
5.9
MS-3-BE-422 111
1.1
0.8
6.8
MS-2-CA-261 96
10.1
4.7
6.8
4.8
12x12
15x18
MS-2-CA-261 97
8.15
3.7
5.2
MS-2-CA-261 97
6.65
3.2
5.6
MS-2-CA-261 97
5.6
2.6
6.2
MS-2-CA-261 97
4.32
2
7.1
  MS-2-CA-202 96
12.8
4.5
8.2
4.8
12x12
118x18
MS-2-CB-202 95
10.4
3.6
5.2
MS-2-CC-202 95
8.77
3.1
5.6
MS-2-CD-202 95
7.1
2.5
6.2
MS-2-CE-202 95
5.46
1.9
7.1
  MS-3-CA-061 109
4.2
3.8
5.3
6.7
9x9
15x15
MS-3-CB-061 110
3.41
3.1
7.3
MS-3-CC-061 110
2.91
2.6
7.9
MS-3-CD-061 110
2.37
2.1
8.8
MS-3-CE-061 110
1.8
1.6
10.2
  MS-3-CA-633 104
14
5.4
10.7
5.8
9x12
21x21
MS-3-CB-633 107
9.32
3.5
6.7
MS-3-CC-633 108
7.62
3
7.3
MS-3-CD-633 108
6.45
2.5
7.9
MS-3-CE-633 108
5.21
2
8.8
MS-3-CF-633 108
4.04
1.5
10.2
MS-4-CA-653 119
4.7
3.3
10.4
6.7
6x9
21x21
MS-4-CA-653 119
3.79
2.7
7.3
MS-4-CA-653 120
3.2
2.3
7.9
MS-4-CA-653 120
2.61
1.9
8.8
MS-4-CA-653 120
2
1.4
10.2
ML - Subseries

«ML – Subseries» TECs – linear cascade thermoelectric coolers.

ML - Subseries
Product Image TEC model DT max
(K)
Qmax
(W)
Imax
(A)
Umax
(V)
H
(mm)
Top,
AxB
(mm)
Bottom,
CxD
(mm)
  ML-2-ACG-3072 96
0.53
0.6
2.55
4.7
3.2x9.6
3.2x9.6
ML-2-ABE-3072 96
0.68
0.76
4
ML-2-AAC-3072951.021.163.2
  ML-2-ACG-2560 95
0.42
0.6
2.1
4.7
3.2x8
3.2x8
ML-2-ABE-2560 95
0.56
0.76
4
ML-2-AAC-2560 94
0.81
1.15
3.2
  ML-2-ACG-2048 96
0.33
0.61
1.6
4.7
3.2x6.4
3.2x6.4
ML-2-ABE-2048 96
0.42
0.78
4
ML-2-AAC-2048 95
0.61
1.16
3.2
  ML-2-BCG-4800 96
1.20
1.37
2.6
4.7
4x12
4x12
ML-2-BBE-4800 96
1.55
1.75
4
ML-2-BAC-4800 95 2.29
2.6
3.2
  ML-2-BCG-4000 95
0.98
1.4
2.1
4.7
4x10
4x10
ML-2-BBE-4000 95
1.23
1.75
4
ML-2-BAC-4000 94
1.84
2.6
3.2
  ML-2-BCG-3200 96
0.73
1.4
1.6
4.7
4x8
4x8
ML-2-BBE-3200 96
0.95
1.75
4
ML-2-BAC-3200 95
1.4
2.64
3.2
ML-2-CDH-1890 100
4.4
3.7
4.7
6.9
9x219x21
ML-2-CCG-1890 100
5.4
4.1
6.2
ML-2-CBE-1890 100
6.9
5.2
5.5
ML-2-CAC-1890 99 10.2 7.8 5.1
  ML-2-CDH-1620 100
3.8
3.4
4
6.9
9x18
9x18
ML-2-CCG-1620 100
4.6
4.1
6.2
ML-2-CBE-1620 100 5.9
5.2
5.5
ML-2-CAC-1620 99 8.7 7.8 5.1
ML-2-CDH-1350 99
3.1
3.4
4
6.9
9x159x15
ML-2-CCG-1350 99
3.8
4.1
6.2
ML-2-CBE-1350 99
4.9
5.1
5.5
ML-2-CAC-1350 98 7.2 7.6 5.1
ME - Subseries

«ME – Subseries» TECs – cascade thermoelectric coolers with increased cold side area.

ME - Subseries
Product Image TEC model DT max
(K)
Qmax
(W)
Imax
(A)
Umax
(V)
H
(mm)
Top,
AxB
(mm)
Bottom,
CxD
(mm)
ME-2-ABF-020 97
0.21
0.8
0.85
4.0
3.2x3.2
3.2x3.2
ME-2-AAC-020 96
0.31
1.2
3.2
  ME-2-ACG-024 98
0.35
0.65
1.85
4.7
4.8x4.8
4.8x4.8
ME-2-ABF-024 98
0.45
0.82
4.0
ME-2-AAC-024 97
0.67
1.2
3.2
ME-2-ACG-680 95
0.74
10.6
3.6
4.7
8x8
8x8
ME-2-ABF-680 95
0.92
0.74
4.0
ME-2-AAC-680 94
1.41
1.14
3.2
  ME-2-ACG-231 98
1.11
0.64
5.7
4.7
8x8
8x8
ME-2-ABF-231 98
1.40
0.81
4.0
ME-2-AAC-231 97 2.15
1.2
3.2
  ME-2-BCG-030 100
0.55
1.5
1.35
4.7
4x4
4x6
ME-2-BBF-030 100
0.69
1.8
4.0
ME-2-BAC-030 99
1.04
2.8
3.2
  ME-2-ACG-480 96
1.61
1.4
3.6
4.7
8x8
8x8
ME-2-ABF-480 96
2.08
1.8
4.0
ME-2-AAC-480 95
3.05
2.5
3.2
Individual TEC Request

If you did not find suitable TECs for your application or you are not sure what exact model you need, please fill in specification form as full as you can and send it to us. Our specialists will contact you ASAP.

Customer information
Requirements Specification
Object to be cooled
Restriction on TEC Dimensions
Restrictions on Electrical Parameters (if applicable)
Restriction on Heat Removal
If you do not know this temperature, please specify the parameters stated below.
Other additional information