Thermoelectric Modules and Systems - Development, Manufacturing, Industrialization

Tel./fax: +7 4842 901 954

Products

S-Series TECs

The «S-Series» is a line of the single stage thermoelectric coolers which are able to provide maximum temperature difference up to 76 (K). These series includes more than 400 standard TECs models. Here you will find TECs with performance characteristics ranges as shown in the table:

Imax (A) Umax (V) Qmax (W) Height (mm)
 Overall dimension (sq.mm)
 0.55 - 9.7
 0.48 - 11.5
 0.27 - 62
 1.65 - 4.1
 1.6 x 3.2 - 21x21

«S-Series» is divided to the next subseries:

SS – standard rectangular TECs;

SL – linear TECs;

SR – round TECs;

SH – TECs with holes;

SI – TECs with increased cooling capacity;

To get more technical information about concrete TEC model please choose corresponding section below.

Notes and Definitions section should be visited before start surfing catalogue of our products.

Notes and Definitions

Parameter

Definition

Imax, (A)

TEC current at ΔTmax

Umax, (V)

TEC voltage at ΔTmax

ΔTmax, (K)

Maximum temperature difference between TEC cold and hot side (I=Imax, Qmax=0)

Qmax, (W)

Maximum TEC cooling capacity  (I=Imax, ΔT=0)

Th, (K)

TEC hot side temperature

H, (mm)        

TEC height

Top=AxB, (mm)

Dimensions of the TEC cold side

Bottom=CxD, (mm)

Dimensions of the TEC hot side

General Notes:

All TEC performance characteristics given for 30°C in vacuum

All TEC dimensions given in millimeters

To estimate TEC cooling capacity (Q ) at ΔT different from ΔTmax use equation Q=Qmax (1-ΔT/ΔTmax)

To estimate TEC temperature difference (ΔT) at Q different from Qmax use equation ΔT = ΔTmax (1- Q/Qmax)

All our standard and customized TECs can be implemented in a according to standard Manufacturing Options.

Manufacturing Options

1. TEC substrates

a)      High Purity Aluminum Oxide (Al2O3, 99.6 %)

b)      Aluminum Oxide (Al2O3, 96 %)

c)      Aluminum Nitride


2. TEC internal solder

a)      PbSn (m/p: 183 °C)

b)      SnBi (m/p: 230 °C, Pb-free)

c)      AuSn (m/p: 280 °C, Pb-free) on request


3. TEC outer surfaces treatment

a)      Naked ceramic (no metallization)

b)      Au plated (ready for wire bonding process)

c)      Metallized and pretinned with:

-          InSn (m/p: 117°C);

-          BiSn (m/p: 138°C);

-          In (m/p: 157°C);

d)      Other options can be implemented on request


4. TEC current leads

a)      Pretinned copper wires (length can be varied on request)

b)      Insulated wires (length can be varied on request)

c)      Cu posts Au plated

5. Thermistor

Can be installed to the TEC cold/hot side on request

SS – Subseries

«SS – Subseries» - line of standard rectangular thermoelectric coolers. 

SS – Subseries
Product Image TEC model DT max
(K)
Qmax
(W)
Imax
(A)
Umax
(V)
H
(mm)
Top,
AxB
(mm)
Bottom,
CxD
(mm)


TEC datasheet
SS-AA-008
71
0.41
1.55
0.49
1.6
1.6
3.2
3.2
3.2
SS-AB-008
72
0.28
1
1.9
SS-AC-008 
72
0.22
0.8
2.1
SS-AD-008
72
0.19
0.7
2.3
SS-AE-008
72
0.15
0.55
2.6
  SS-AA-014
72
0.72
1.55
0.85
1.6
3.2
3.2
3.2
3.2
SS-AB-014
73
0.48
1
1.9
SS-AC-014
73
0.39
0.8
2.1
SS-AD-014
73
0.33
0.7
2.3
SS-AE-014
73
0.27
0.55
2.6
  SS-AA-016
72
0.83
1.55
0.96
1.6
3.2
3.2
4.8
3.2
SS-AB-016
73
0.55
1
1.9
SS-AC-016 
73
0.44
0.8
2.1
SS-AD-016
73
0.37
0.7
2.3
SS-AE-016
73
0.3
0.55
2.6
  SS-AA-022
72
1.15
1.55
1.3
1.6
3.2
4.8
3.2
4.8
SS-AB-022
73
0.75
1
1.9
SS-AC-022
73
0.6
0.8
2.1
SS-AD-022
73
0.52
0.7
2.3
SS-AE-022
73
0.42
0.55
2.6
  SS-AA-024
72
1.24
1.55
1.4
1.6
3.2
4.8
4.8
4.8
SS-AB-024
73
0.82
1
1.9
SS-AC-024
73
0.67
0.8
2.1
SS-AD-024
73
0.55
0.7
2.3
SS-AE-024
73
0.47
0.55
2.6
  SS-AA-034
72
1.73
1.55
2
1.6
4.8
4.8
4.8
4.8
SS-AB-034
73
1.16
1
1.9
SS-AC-034
73
0.93
0.8
2.1
SS-AD-034
73
0.8
0.7
2.3
SS-AE-034
73
0.65
0.55
2.6
  SS-AA-036
72
1.9
1.55
2.2
1.6
4.8
4.8
6.4
4.8
SS-AB-036
73
1.22
1
1.9
SS-AC-036
73
1
0.8
2.1
SS-AD-036
73
0.82
0.7
2.3
SS-AE-036
73
0.68
0.55
2.6
  SS-AA-046
72
2.35
1.55
2
1.6
4.8
6.4
4.8
6.4
SS-AB-046
73
1.57
1
1.9
SS-AC-046
73
1.27
0.8
2.1
SS-AD-046
73
1.08
0.7
2.3
SS-AE-046
73
0.88
0.55
2.6
  SS-AA-048
72
2.5
1.55
2.9
1.6
4.8
6.4
6.4
6.4
SS-AB-048
73
1.63
1
1.9
SS-AC-048
73
1.34
0.8
2.1
SS-AD-048
73
1.1
0.7
2.3
SS-AE-048
73
0.91
0.55
2.6
  SS-AA-060
72
3.11
1.55
3.6
1.6
6.4
6.4
6.4
6.4
SS-AB-060
73
2.05
1
1.9
SS-AC-060
73
1.65
0.8
2.1
SS-AD-060
73
1.41
0.7
2.3
SS-AE-060
73
1.14
0.55
2.6
  SS-AA-064
72
3.33
1.55
3.8
1.6
6.4
6.4
8
6.4
SS-AB-064
73
2.12
1
1.9
SS-AC-064
73
1.79
0.8
2.1
SS-AD-064
73
1.47
0.7
2.3
SS-AE-064
73
1.22
0.55
2.6
  SS-AA-096
72
4.95
1.55
5.8
1.6
8
8
8
8
SS-AB-096
73
3.28
1
1.9
SS-AC-096
73
2.64
0.8
2.1
SS-AD-096
73
2.26
0.7
2.3
SS-AE-096
73
1.83
0.55
2.6
  SS-AA-116
72
3.33
1.55
7
1.6
8
9.6
8
9.6
SS-AB-116
73
2.12
1
1.9
SS-AC-116
73
1.79
0.8
2.1
SS-AD-116
73
1.47
0.7
2.3
SS-AE-116
73
1.22
0.55
2.6
SS-AA-120
72
6.24
1.55
7.2
1.6
8.6
9.6
9.6
9.6
SS-AB-120
73
4.1
1
1.9
SS-AC-120
73
3.36
0.8
2.1
SS-AD-120
73
2.76
0.7
2.3
SS-AE-120
73
2.28
0.55
2.6
  SS-AA-140
72
7.22
1.55
8.4
1.6
9.6
9.6
9.6
9.6
SS-AB-140
73
4.77
1
1.9
SS-AC-140
73
3.88
0.8
2.1
SS-AD-140
73
3.28
0.7
2.3
SS-AE-140
73
2.65
0.55
2.6
  SS-AA-140
72
7.22
1.55
8.4
1.6
9.6
9.6
9.6
9.6
SS-AB-140
73
4.77
1
1.9
SS-AC-140
73
3.88
0.8
2.1
SS-AD-140
73
3.28
0.7
2.3
SS-AE-140
73
2.65
0.55
2.6
  SS-BA-008
72
0.93
3.5
0.48
1.6
2
4
4
4
SS-BB-008
73
0.62
2.3
1.9
SS-BC-008
73
0.5
1.9
2.1
SS-BD-008
73
0.42
1.6
2.3
SS-BE-008
73
0.34
1.3
2.6
SS-BA-014
72
1.62
3.5
0.84
1.6
4
4
4
4
SS-BB-014
73
1.08
2.3
1.9
SS-BC-014
73
0.87
1.9
2.1
SS-BD-014
73
0.74
1.6
2.3
SS-BE-014
73
0.6
1.3
2.6
  SS-BA-016
72
1.9
3.5
0.96
1.6
4
4
6
4
SS-BB-016
73
1.2
2.3
1.9
SS-BC-016
73
1
1.9
2.1
SS-BD-016
73
0.9
1.6
2.3
SS-BE-016
73
0.7
1.3
2.6
  SS-BA-022
72
2.6
3.5
1.3
1.6
4
6
4
6
SS-BB-022
73
1.69
2.3
1.9
SS-BC-022
73
1.36
1.9
2.1
SS-BD-022
73
1.16
1.6
2.3
SS-BE-022
73
0.94
1.3
2.6
  SS-BA-024
72
2.8
3.5
1.4
1.6
4
6
6
6
SS-BB-024
73
1.8
2.3
1.9
SS-BC-024
73
1.5
1.9
2.1
SS-BD-024
73
1.3
1.6
2.3
SS-BE-024
73
1.1
1.3
2.6
  SS-BA-034
72
3.9
3.5
2.0
1.6
6
6
6
6
SS-BB-034
73
2.62
2.3
1.9
SS-BC-034
73
2.11
1.9
2.1
SS-BD-034
73
1.8
1.6
2.3
SS-BE-034
73
1.46
1.3
2.6
  SS-BA-036
72
4.2
3.5
2.2
1.6
6
6
8
6
SS-BB-036
73
2.7
2.3
1.9
SS-BC-036
73
2.2
1.9
2.1
SS-BD-036
73
1.9
1.6
2.3
SS-BE-036
73
1.6
1.3
2.6
  SS-BA-046
72
5.3
3.5
2.8
1.6
6
8
6
8
SS-BB-046
73
3.54
2.3
1.9
SS-BC-046
73
2.85
1.9
2.1
SS-BD-046
73
2.43
1.6
2.3
SS-BE-046
73
1.99
1.3
2.6
  SS-BA-060
72
7
3.5
3.6
1.6
8
8
8
8
SS-BB-060
73
4.62
2.3
1.9
SS-BC-060
73
3.72
1.9
2.1
SS-BD-060
73
3.18
1.6
2.3
SS-BE-060
73
2.58
1.3
2.6
  SS-BA-064
72
7.4
3.5
3.8
1.6
8
8
10
8
SS-BB-064
73
4.9
2.3
1.9
SS-BC-064
73
4
1.9
2.1
SS-BD-064
73
3.4
1.6
2.3
SS-BE-064
73
2.8
1.3
2.6
  SS-BA-096
72
11.1
3.5
5.8
1.6
10
10
10
10
SS-BB-096
73
7.39
2.3
1.9
SS-BC-096
73
5.95
1.9
2.1
SS-BD-096
73
5.08
1.6
2.3
SS-BE-096
73
4.12
1.3
2.6
  SS-BA-100
72
11.6
3.5
6.0
1.6
10
10
12
10
SS-BB-100
73
7.6
2.3
1.9
SS-BC-100
73
6.2
1.9
2.1
SS-BD-100
73
5.3
1.6
2.3
SS-BE-100
73
4.3
1.3
2.6
  SS-BA-116
72
13.5
3.5
7.0
1.6
10
12
10
12
SS-BB-116
73
8.93
2.3
1.9
SS-BC-116
73
7.19
1.9
2.1
SS-BD-116
73
6.15
1.6
2.3
SS-BE-116
73
4.98
1.3
2.6
SS-BA-120
72
13.9
3.5
7.2
1.6
10
12
12
12
SS-BB-120
73
9.1
2.3
1.9
SS-BC-120
73
7.4
1.9
2.1
SS-BD-120
73
6.4
1.6
2.3
SS-BE-120
73
5.2
1.3
2.6
  SS-BA-140
72
16.3
3.5
8.4
1.6
12
12
12
12
SS-BB-140
73
10.7
2.3
1.9
SS-BC-140
73
8.74
1.9
2.1
SS-BD-140
73
7.39
1.6
2.3
SS-BE-140
73
5.97
1.3
2.6
SL – Subseries

«SL – Subseries» - line of single stage linear thermoelectric coolers destined for cooling of vagarious oblong cooled. Option with lead wires perpendicular to long side is possible.

SL – Subseries
Product Image TEC model DT max
(K)
Qmax
(W)
Imax
(A)
Umax
(V)
H
(mm)
Top,
AxB
(mm)
Bottom,
CxD
(mm)
  SL-AA-010
72
0.52
1.6
0.6
1.2
4.8
1.6
4.8
1.6
SL-AB-010
73
0.34
1
1.5
SL-AC-010
73
0.28
0.8
1.7
SL-AD-010
73
0.23
0.7
1.9
SL-AE-010
73
0.19
0.55
2.2
  SL-AA-014
72
0.73
1.6
0.84
1.2
6.4
1.6
6.4
1.6
SL-AB-014
73
0.48
1
1.5
SL-AC-014
73
0.39
0.8
1.7
SL-AD-014
73
0.32
0.7
1.9
SL-AE-014
73
0.27
0.55
2.2
  SL-AA-016
72
0.83
1.6
0.96
1.2
4.8
2.4
4.8
2.4
SL-AB-016
73
0.54
1
1.5
SL-AC-016
73
0.45
0.8
1.7
SL-AD-016
73
0.37
0.7
1.9
SL-AE-016
73
0.3
0.55
2.2
  SL-AA-022
72
1.14
1.6
1.3
1.2
6.4
2.4
6.4
2.4
SL-AB-022
73
0.74
1
1.5
SL-AC-022
73
0.62
0.8
1.7
SL-AD-022
73
0.51
0.7
1.9
SL-AE-022
73
0.42
0.55
2.2
  SL-AA-030
72
1.56
1.6
1.8
1.6
6.4
3.2
6.4
3.2
SL-AB-030
73
1.02
1
1.9
SL-AC-030
73
0.84
0.8
2.1
SL-AD-030
73
0.69
0.7
2.3
SL-AE-030
73
0.57
0.55
2.6
  SL-AA-038
72
1.98
1.6
2.3
1.6
8
3.2
8
3.2
SL-AB-038
73
1.29
1
1.9
SL-AC-038
73
1.06
0.8
2.1
SL-AD-038
73
0.87
0.7
2.3
SL-AE-038
73
0.72
0.55
2.6
SL-AA-044
72
2.28
1.6
2.6
1.6
9.6
3.2
9.6
3.2
SL-AB-044
73
1.5
1
1.9
SL-AC-044
73
1.23
0.8
2.1
SL-AD-044
73
1.01
0.7
2.3
SL-AE-044
73
0.84
0.55
2.6
  SL-AA-056
72
2.91
1.6
3.4
1.6
8
4.8
8
4.8
SL-AB-056
73
1.9
1
1.9
SL-AC-056 
73
1.57
0.8
2.1
SL-AD-056
73
1.29
0.7
2.3
SL-AE-056
73
1.06
0.55
2.6
  SL-AA-068
72
3.57
1.6
4.1
1.6
9.6
4.8
9.6
4.8
SL-AB-068
73
2.31
1
1.9
SL-AC-068
73
1.9
0.8
2.1
SL-AD-068
73
1.56
0.7
2.3
SL-AE-068
73
1.29
0.55
2.6
  SL-AA-072
72
3.95
1.6
4.5
1.6
8
6.4
8
6.4
SL-AB-072
73
2.58
1
1.9
SL-AC-072 
73
2.13
0.8
2.1
SL-AD-072
73
1.75
0.7
2.3
SL-AE-072
73
1.44
0.55
2.6
  SL-AA-092
72
4.75
1.6
5.5
1.6
9.6
6.4
9.6
6.4
SL-AB-092
73
3.13
1
1.9
SL-AC-092
73
2.55
0.8
2.1
SL-AD-092
73
2.15
0.7
2.3
SL-AE-092
73
1.74
0.55
2.6
  SL-BA-010
72
1.16
3.4
0.6
1.6
6
2
6
2
SL-BB-010
73
0.77
2.3
1.9
SL-BC-010 
73
0.62
1.9
2.1
SL-BD-010
73
0.53
1.6
2.3
SL-BE-010
73
0.43
1.3
2.6
  SL-BA-014
72
1.62
3.4
0.84
1.6
8
2
8
2
SL-BB-014
73
1.08
2.3
1.9
SL-BC-014
73
0.87
1.9
2.1
SL-BD-014
73
0.74
1.6
2.3
SL-BE-014
73
0.6
1.3
2.6
  SL-BA-018
72
2.09
3.4
1.1
1.6
10
2
10
2
SL-BB-018
73
1.39
2.3
1.9
SL-BC-018
73
1.12
1.9
2.1
SL-BD-018
73
0.95
1.6
2.3
SL-BE-018
73
0.77
1.3
2.6
  SL-BA-022
72
2.55
3.4
1.3
1.6
12
2
12
2
SL-BB-022
73
1.69
2.3
1.9
SL-BC-022
73
1.36
1.9
2.1
SL-BD-022
73
1.17
1.6
2.3
SL-BE-022
73
0.95
1.3
2.6
  SL-BA-030
72
3.48
3.4
1.8
1.6
8
4
8
4
SL-BB-030
73
2.31
2.3
1.9
SL-BC-030
73
1.86
1.9
2.1
SL-BD-030
73
1.59
1.6
2.3
SL-BE-030
73
1.29
1.3
2.6
  SL-BA-038
72
4.41
3.4
2.3
1.6
10
4
10
4
SL-BB-038
73
2.93
2.3
1.9
SL-BC-038
73
2.35
1.9
2.1
SL-BD-038
73
2.01
1.6
2.3
SL-BE-038
73
1.63
1.3
2.6
  SL-BA-044
72
5.1
3.4
2.6
1.6
12
4
12
4
SL-BB-044
73
3.39
2.3
1.9
SL-BC-044
73
2.73
1.9
2.1
SL-BD-044
73
2.33
1.6
2.3
SL-BE-044
73
1.89
1.3
2.6
  SL-BA-056
72
6.5
3.4
3.4
1.6
10
6
10
6
SL-BB-056
73
4.31
2.3
1.9
SL-BC-056
73
3.47
1.9
2.1
SL-BD-056
73
2.97
1.6
2.3
SL-BE-056
73
2.41
1.3
2.6
  SL-BA-068
72
7.89
3.4
4.1
1.6
12
6
12
6
SL-BB-068
73
5.24
2.3
1.9
SL-BC-068
73
4.22
1.9
2.1
SL-BD-068
73
3.6
1.6
2.3
SL-BE-068
73
2.92
1.3
2.6
  SL-BA-076
72
8.82
3.4
4.5
1.6
10
8
10
8
SL-BB-076
73
5.85
2.3
1.9
SL-BC-076
73
4.71
1.9
2.1
SL-BD-076
73
4.03
1.6
2.3
SL-BE-076
73
3.27
1.3
2.6
  SL-BA-092
72
10.7
3.4
5.5
1.6
12
8
12
8
SL-BB-092
73
7.05
2.3
1.9
SL-BC-092
73
5.74
1.9
2.1
SL-BD-092
73
4.84
1.6
2.3
SL-BE-092
73
3.92
1.3
2.6
  SL-CA-018
72
5.8
9.7
1.1
3.0
15
3
15
3
SL-CB-018
73
3.8
6.3
2.9
SL-CC-018
73
3.1
5.2
3.1
SL-CD-018
73
2.6
4.3
3.3
SL-CE-018
73
2.1
3.5
3.6
SL-CE-018
73
1.6
2.7
4.1
  SL-CA-022
72
7.1
9.7
1.3
3.0
18
3
18
3
SL-CB-022
73
4.7
6.3
2.9
SL-CC-022
73
3.8
5.2
3.1
SL-CD-022
73
3.2
4.3
3.3
SL-CE-022
73
2.6
3.5
3.6
SL-CE-022
73
2
2.7
4.1
  SL-CA-038
72
12.2
9.7
2.3
3.0
15
6
15
6
SL-CB-038
73
8.1
6.3
2.9
SL-CC-038
73
6.6
5.2
3.1
SL-CD-038
73
5.6
4.3
3.3
SL-CE-038
73
4.5
3.5
3.6
SL-CE-038
73
3.5
2.7
4.1
  SL-CA-044
72
14.2
9.7
2.6
3.0
18
6
18
6
SL-CB-044
73
9.4
6.3
2.9
SL-CC-044
73
7.6
5.2
3.1
SL-CD-044
73
6.4
4.3
3.3
SL-CE-044
73
5.2
3.5
3.6
SL-CE-044
73
4
2.7
4.1
  SL-CA-052
72
16.7
9.7
3.1
3.0
21
6
21
6
SL-CB-052
73
11.1
6.3
2.9
SL-CC-052
73
9
5.2
3.1
SL-CD-052
73
7.6
4.3
3.3
SL-CE-052
73
6.1
3.5
3.6
SL-CE-052
73
4.7
2.7
4.1
  SL-CA-056
72
18
9.7
3.7
3.0
15
9
15
9
SL-CB-056
73
11.9
6.3
2.9
SL-CC-056
73
9.7
5.2
3.1
SL-CD-056
73
8.2
4.3
3.3
SL-CE-056
73
6.6
3.5
3.6
SL-CE-056
73
5.1
2.7
4.1
  SL-CA-068
72
21.9
9.7
4.1
3.0
18
9
18
9
SL-CB-068
73
14.5
6.3
2.9
SL-CC-068
73
11.8
5.2
3.1
SL-CD-068
73
9.9
4.3
3.3
SL-CE-068
73
8
3.5
3.6
SL-CE-068
73
6.2
2.7
4.1
  SL-CA-076
72
24.5
9.7
4.6
3.0
15
12
15
12
SL-CA-076
73
16.2
6.3
2.9
SL-CA-076
73
13.2
5.2
3.1
SL-CA-076
73
11.1
4.3
3.3
SL-CA-076
73
9
3.5
3.6
SL-CA-076
73
6.9
2.7
4.1
  SL-CA-080
72
25.8
9.7
4.8
3.0
21
9
21
9
SL-CA-080
73
17
6.3
2.9
SL-CA-080
73
13.8
5.2
3.1
SL-CA-080
73
11.7
4.3
3.3
SL-CA-080
73
9.4
3.5
3.6
SL-CA-080
73
7.3
2.7
4.1
  SL-CA-092
72
29.6
9.7
5.5
3.0
18
12
18
12
SL-CA-092
73
19.6
6.3
2.9
SL-CA-092
73
15.9
5.2
3.1
SL-CA-092
73
13.4
4.3
3.3
SL-CA-092
73
10.9
3.5
3.6
SL-CA-092
73
8.4
2.7
4.1
  SL-CA-096
72
31.0
9.7
5.8
3.0
15
3
15
3
SL-CA-096
73
20.5
6.3
2.9
SL-CA-096
73
16.6
5.2
3.1
SL-CA-096
73
14.0
4.3
3.3
SL-CA-096
73
11.3
3.5
3.6
SL-CA-096
73
8.7
2.7
4.1
  SL-CA-108
72
34.8
9.7
6.5
3.0
21
12
21
12
SL-CA-108
73
23
6.3
2.9
SL-CA-108
73
18.7
5.2
3.1
SL-CA-108
73
15.8
4.3
3.3
SL-CA-108
73
12.7
3.5
3.6
SL-CA-108
73
9.8
2.7
4.1
  SL-CA-116
72
37.4
9.7
7
3.0
18
15
18
15
SL-CA-116
73
24.7
6.3
2.9
SL-CA-116
73
20.1
5.2
3.1
SL-CA-116
73
16.9
4.3
3.3
SL-CA-116
73
13.7
3.5
3.6
SL-CA-116
73
10.6
2.7
4.1
  SL-CA-136
72
43.8
9.7
8.1
3.0
21
15
21
15
SL-CA-136
73
29
6.3
2.9
SL-CA-136
73
23.5
5.2
3.1
SL-CA-136
73
19.6
4.3
3.3
SL-CA-136
73
16.1
3.5
3.6
SL-CA-136
73
12.4
2.7
4.1
  SL-CA-140
72
45.1
9.7
8.4
3.0
18
18
18
18
SL-CA-140
73
29.8
6.3
2.9
SL-CA-140
73
24.2
5.2
3.1
SL-CA-140
73
20.4
4.3
3.3
SL-CA-140
73
16.5
3.5
3.6
SL-CA-140
73
12.7
2.7
4.1
  SL-CA-164
72
52.8
9.7
9.8
3.0
21
18
21
18
SL-CA-164
73
34.9
6.3
2.9
SL-CA-164
73
28.4
5.2
3.1
SL-CA-164
73
23.9
4.3
3.3
SL-CA-164
73
19.4
3.5
3.6
SL-CA-164
73
14.9
2.7
4.1
  SL-CA-192
72
61.9
9.7
11.5
3.0
21
21
21
21
SL-CA-192
73
40.8
6.3
2.9
SL-CA-192
73
33.3
5.2
3.1
SL-CA-192
73
28
4.3
3.3
SL-CA-192
73
22.7
3.5
3.6
SL-CA-192
73
17.5
2.7
4.1
Individual TEC Request

If you did not find suitable TECs for your application or you are not sure what exact model you need, please fill in specification form as full as you can and send it to us. Our specialists will contact you ASAP.

Customer information
Requirements Specification
Object to be cooled
Restriction on TEC Dimensions
Restrictions on Electrical Parameters (if applicable)
Restriction on Heat Removal
If you do not know this temperature, please specify the parameters stated below.
Other additional information